Month: March 2022

One of the dangers of commercial HVAC systems is that they can be very dangerous to operate if you are not a professional. Many people think that they can just go and start messing with the thermostat or fan without knowing what they are doing, but this can lead to some serious injuries.

Electrical Shock
One of the biggest dangers of commercial HVAC systems is that they can cause electrical shocks. If you are not familiar with how to work with electricity, it is very easy to get shocked when you are working on an HVAC system. You could also easily start a fire if you are not careful.

Physical Injuries
Another danger of commercial HVAC systems is that they can cause injuries if you are not careful. There are a lot of moving parts in an HVAC system, and if you are not paying attention, you could easily get injured. There are also a lot of sharp edges on some of the parts, so be very careful when working on an HVAC system.

So, if you are not a professional, it is best to stay away from commercial HVAC systems. They can be very dangerous if you are not familiar with how to operate them safely. Instead, hire a professional commercial HVAC contractor to take care of your HVAC needs. They will know how to safely operate the system.

Each season puts different demands on your commercial HVAC system. With that in mind, a thorough inspection should be performed and a maintenance routine developed as the weather changes. Just as you would check for snow obstructions, iced components, and other issues in the winter, action must be taken to ensure your system will perform consistently in spring. Here are six items to include on your checklist:

1. Review the thermostat settings

It’s important to verify that the thermostat is set up for the current weather conditions. In particular, you’ll want to make sure that it’s not cooling or heating the building more than necessary. You may also need to adjust fan speed and humidity levels.

2. Inspect the filters

Dirty filters restrict airflow and can cause your HVAC system to work harder than necessary, leading to increased energy costs and premature wear and tear on the equipment. It’s a good idea to check and replace filters every month or so, depending on your environment and filter type.

3. Clean the evaporator coils

These coils are responsible for absorbing heat from the air and transferring it to the refrigerant. If they become dirty, the coil’s effectiveness is reduced and your system will have to work harder to maintain the desired temperature. Coils can be cleaned with a special coil cleaner or a garden hose.

4. Inspect the condenser

The condenser is responsible for releasing heat from the refrigerant. If it becomes blocked or covered in debris, the system will not be able to cool properly. You can clean the condenser with a garden hose or pressure washer.

5. Check the refrigerant levels

If the refrigerant levels are low, your system may not be able to provide the cooling power you need. You can have a professional check and refill the refrigerant as necessary.

6. Tighten all connections

Loose connections can cause the system to work harder than necessary and lead to component failure. It’s a good idea to give all of the system’s connections a quick check and tighten them as needed.

By following this checklist, you can help ensure that your commercial HVAC system is ready for the demands of spring.